Contact Us

Revere CO2 Air to Water Heat Pump CHP-080Y2

Revere™ CY80 CO₂ Heat Pump to produce 90°C hot water makes it suitable for use in a wide range of industrial, commercial and residential projects, including food processing plants, dairies, shopping centres, apartments, hotels, restaurants, hospitals, aged care, recreational and educational facilities.

Product Range

Revere CO2 Heat Pump

Heating Capacity Range

5 – 80kW

Maximum Heating Water Temperature

90°C

Efficiency*

Average COP 3.9

Refrigerant

R744 (CO2)

Outdoor Option

Yes

Cascadable

Yes

Building J Code 2019 Compliant

Yes

* Efficiency varies according to model, water temperature and ambient conditions. Refer to Specifications for more details.

  • Flexible – The same system can be simultaneously used for Space Heating & Domestic Hot Water
  • Ultra quiet operation – 60dBa
  • No combustion – reduces fire risk
  • Suitable for up to 60°C ΔT (flow 90°C, return 30°C)
  • Suits Australian conditions – accommodates ambient operating temperatures from -5°C to 43°C (Special unit available for -15°C or -20°C)
  • Safe – Non-flammable CO₂ refrigerant
  • Programmable – can be set to operate during off peak times to benefit from low cost power
  • 30% Space Saving due to Y Frame design (CHP-80)
  • Versatile – Suitable for a wide range of purposes, from small facilities to large buildings where hot water or heating is required
  • Eco friendly – The Revere® CO2 Heat Pump uses natural CO₂ refrigerant. This refrigerant has a global warming potential (GWP) of about 1/1700 that of R410 and zero ozone-depleting potential (ODP)
  • Energy efficient – Under optimal conditions, Revere® CO2 Heat Pumps achieve an exceptional coefficient of performance (up to 4.2) which equates to higher energy efficiency. Compared to the traditional electric hot water heater, the CO2 hot water heat pump can save up to 75% heating energy. Further energy cost savings can be achieved through operation during off peak hours, subject to off-peak electrical power supply
  • Anti-freeze/Cold Area Units – the heat pump is fitted with a defrost solenoid valve which will open when the evaporator ices up. The hot gas will then flow through the evaporator and melts the ice. Water cannot be stored during defrosting
  • Heats up to 90°C – Due to its innovative design, the Revere® CO2 Heat Pump can produce hot water up to 90°C at low and high ambient temperatures (-20°C to 43°C)
  • One pass heating – It is suitable for heating water from low to high temperatures (large temperature difference) in one pass
  • Reduces storage requirements – Since this hot water heat pump can heat water up to 90ºC, the size of the storage tank can be reduced
  • Energy Saving Function – This function is an energy saving function that learns operation patterns from the four previous weeks to prevent unnecessary heating and temperature decreases in stored water through natural heat loss. The use of this function based on operation data stops the unit from boiling water unnecessarily.

Using proven technology and ground-breaking design, the Revere™ CO₂ Heat Pump system is powered by electricity and utilizes heat extracted from the air to produce heat energy to make hot water.

The unique capacity of the Revere™ CO₂ Heat Pump to produce 90°C hot water makes it suitable for use in a wide range of industrial, commercial and residential projects, including food processing plants, dairies, shopping centres, apartments, hotels, restaurants, hospitals, aged care, recreational and educational facilities. Revere™ CO₂ Heat Pumps can also be adopted with a high level of safety as the absence of combustion reduces the risk of fire.

Instead of the more conventional ammonia or haloalkane (R134A) refrigerant gases, Revere™ CO₂ Heat Pumps use supercritical carbon dioxide as the refrigerant. The technology offers a means of energy conservation and reduces the emission of greenhouse gas. From the energy output side, the operational characteristics of the heat pump are different to conventional systems (such as electric/gas/oil boilers or electric heaters). With conventional systems, 1kW input of energy provides less than 1 kW of output energy or heat. With a CO₂ heat pump system, every 1kW of input energy consumed produces an average of 3.9 x the input as output energy or heat by extracting heat from the outside air.

Click to Download PDF
Revere CO2 Air to Water Heat Pump CHP-080Y2